Specialist in technische polymeren & circulair ketenbeheer.
Aevum Polymers is gespecialiseerd in de internationale handel en circulaire revalorisatie van technische kunststoffen en high-performance materialen. Wij sourcen wereldwijd en leveren aan verwerkers in Nederland en heel Europa — altijd met focus op kwaliteit, leveringszekerheid en duurzame waardecreatie.
Of het nu gaat om virgin PA66-compounds, Second Choice POM, gerecycled ABS of industrieel regranulaat — wij kennen de markt, classificeren nauwkeurig en leveren snel.
Strategische Partner
Aevum werkt nauw samen met een gevestigde Italiaanse distributeur van thermoplastische polymeren, actief sinds 2003 — uitgegroeid van een regionale speler tot een multiregionale marktspecialist met 7.000 m² aan opslagcapaciteit in Noord-Italië.
Gesourcet via een wereldwijd producentennetwerk
Zes materiaalcategorieën — één toeleveringsketen
Technische Kunststoffen
De kern van precisietoepassingen in automotive, elektronica en werktuigbouw. Beschikbaar als virgin, Second Choice en circulaire grades — versterkt, gevuld, vlamvertragend of tribologisch gemodificeerd.
High-Performance Polymeren
De top van de polymeerhiërarchie — voor toepassingen waar extreme thermische, chemische en mechanische bestendigheid vereist is. Luchtvaart, medische technologie, halfgeleiders en premium automotive.
Compounds
Glasvezelversterkt PA, gevuld POM, slagvast gemodificeerde grades en compounds op maat op basis van polyolefinen, styrenen en technische polymeren — precies afgestemd op de toepassing.
Circulaire Polymeren
Volledig gedocumenteerde, gekwalificeerde en traceerbare circulaire stromen voor elke circulaire toepassing. Inclusief terugkoop van productieafval, regranulaat en afgekeurde batches — de materiaalkringloop sluitend.
Elastomeren
Thermoplastische en thermohardende elastomeren voor toepassingen die flexibiliteit, afdichtingsprestaties en chemische bestendigheid vereisen. Automotive afdichtingsprofielen, bouwafdichtingen, industriële slangen.
Basiskunststoffen & Sourcing
Betrouwbare levering van LDPE, HDPE, LLDPE, PP homo/co, GPPS/HIPS, SAN en EPS. Strategische sourcing via een wereldwijd netwerk, just-in-time levering en consolidatie van leveringen door heel Europa.
Duurzaamheid door ontwerp
Duurzaamheid is een integraal onderdeel van het bedrijfsmodel van Aevum Polymers. In plaats van een lineaire take-make-dispose keten, werkt Aevum vanuit een circulaire materiaalbenadering waarin kunststoffen zo lang mogelijk waarde behouden binnen de keten.
Circulaire materiaalbenadering
Wij denken en handelen vanuit een circulair model waarin materialen niet worden gezien als afval, maar als herbruikbare grondstoffen die zo lang mogelijk in de keten blijven.
Maximale benutting van reststromen
Second Choice materialen, regranulaat en industriële reststromen worden actief geselecteerd, geanalyseerd en gevaloriseerd, zodat onderbenutte stromen weer waarde krijgen.
Gesloten terugkoopsystemen
Aevum neemt productieafval en reststromen van klanten terug en verwerkt deze tot bruikbare grondstof, waarmee een gesloten materiaalkringloop ontstaat.
Efficiënte internationale ketenintegratie
Door slimme sourcing, consolidatie van materiaalstromen en regionale distributiehubs wordt de logistieke keten geoptimaliseerd en de voetafdruk verkleind.
Economische & duurzame waardecreatie
Duurzaamheid en economie versterken elkaar: minder afval, hogere materiaalbenutting en betere ketenintegratie zorgen voor een efficiënt en toekomstbestendig systeem.
Van offshore wind tot koelsystemen in de automotive-industrie — Aevum-materialen maken de transitie naar duurzame energie mogelijk, terwijl onze circulaire aanpak zorgt voor maximaal materiaalwaardebehoud.
187 samenstellingen verdeeld over 8 polymeerfamilies
Filter op familie
De technische specificaties hieronder (polymeercode, versterking, additieven) staan in het Engels — de gangbare vaktaal voor materiaaldatasheets.
| Base polymer | Reinforcement | Modifiers / Additives | Key properties | Typical applications |
|---|---|---|---|---|
| PA66 | — | Standard heat stabiliser (CuI/KI) | Unfilled | Injection moulding, broad applicability |
| PA66 | — | Nucleating agent + lubricant | Unfilled | Cable ties, connectors, fast cycle time |
| PA66 | — | Heat stab (CuI/KI) + lubricant | Unfilled | Automotive connectors |
| PA66 | — | Economic polymer base, lower spec level | Unfilled | Less critical applications |
| PA66 | — | Double heat stab (CuI/KI/KBr) | Unfilled 110°C continuous | Thermally loaded structures |
| PA66 | — | FDA food-contact stabiliser package | Unfilled FDA | Extrusion food-contact, films/strips |
| PA66 | — | FDA + heat stab (CuI/KI) | Unfilled FDA | Extrusion automotive + food-grade |
| PA66 | — | Super tough impact modifier | Unfilled | High impact at low temp., sports applications |
| PA66 | — | Impact modifier + heat stab (CuI/KI) | Unfilled | Automotive interior, natural + black |
| PA66 | — | Halogen-free FR (organophosphinate), V0, heat stab | Unfilled HF FR V0 | E&E connectors |
| PA66 | — | Halogenated FR (DBDPE + Sb₂O₃), V0 | Unfilled FR V0 | Snap-fits, hinges, E&E |
| PA66 | — | HF FR, high ductility, RTI elect. 150°C | Unfilled HF FR V0 RTI 150°C | PCB connectors, terminal blocks |
| PA66/6 copolymer | — | HF FR V0, 25% elongation at break | Copolymer HF FR V0 | Living hinge parts, E&E |
| PA66/6 copolymer | — | Heat stab, FDA food-contact | Copolymer FDA | Extrusion film, packaging film |
| PA66 | GF 15% | Standard heat stabiliser | GF15 | Connectors, housings, lightly reinforced |
| PA66 | GF 15% | Impact modifier + heat stab (CuI/KI) | GF15 | Cable management, thin-wall design |
| PA66 | GF 30% | Standard heat stabiliser | GF30 | Automotive, E&E structure, industry |
| PA66 | GF 30% | Heat stab package (CuI/KI), 110°C+ | GF30 Heat stab | Automotive engine bay |
| PA66 | GF 30% | Double heat stab (CuI/KI + organic AO), 135°C | GF30 Double HS | High thermal load, 135°C continuous |
| PA66 | GF 30% | Heat stab + hydrolysis resistant (CDI) | GF30 Hydrolysis | Cooling circuit, anti-freeze, ATE automotive |
| PA66 | GF 30% | Enhanced heat stab package, 130°C+ | GF30 High HS | EV engine bay, black only |
| PA66 | GF 30% | Improved hydrolysis resistance vs standard | GF30 Hydrolysis+ | Cooling circuit, water pump |
| PA66 | GF 30% | Glycol + oil resistant stabiliser package | GF30 | Automotive cooling circuit, oil pumps |
| PA66 | GF 30% | WRAS drinking water certification + hydrolysis | GF30 WRAS | Drinking water installations |
| PA66 | GF 30% | Impact modifier | GF30 | Automotive, stiffness + toughness combination |
| PA66 | GF 30% | Impact modifier + heat stab (CuI/KI) | GF30 | Automotive interior structural parts |
| PA66 | GF 30% | Halogenated FR V0 (DBDPE + Sb₂O₃) | GF30 FR V0 | E&E structure, UL94 |
| PA66 | GF 30% | HF FR (red phosphorus + phosphorus-free) | GF30 HF FR V0 | E&E broad spectrum |
| PA66 | GF 30% | HF FR + heat stab (CuI/KI) | GF30 HF FR V0 | Automotive E&E, UL94 V0 |
| PA66 | GF 30% | HF FR, best-in-class RTI, CTI>600V, V0 at 0.2mm | GF30 HF FR V0 RTI/CTI max | Premium E&E connectors, UL yellow card |
| PA66 | GF 30% + special X-filler | HF FR, max tracking resistance CTI>600V | GF30+X HF FR V0 | High voltage E&E |
| PA66 | GF 25% | HF FR (red phosphorus + phosphorus-free) | GF25 HF FR V0 | E&E, improved electrical properties |
| PA66 | GF 25% | HF FR + heat stab, UL94 certified | GF25 HF FR V0 | E&E certified |
| PA66 | GF 25% | HF FR, improved CTI 600V | GF25 HF FR V0 | E&E high voltage |
| PA66 | GF 35% | Standard, natural available | GF35 | E&E structural |
| PA66 | GF 35% | Heat stab (CuI/KI) | GF35 Heat stab | Automotive structure |
| PA66 | GF 35% | Impact modifier + heat stab | GF35 | Automotive toughness + stiffness |
| PA66 | GF 35% | Anti-Vibration System (AVS) damping additive | GF35 AVS | EV drivetrain, customer-specific damping |
| PA66 | GF 50% | Standard | GF50 | Maximum stiffness structural parts |
| PA66 | GF 50% | Heat stab (CuI/KI) | GF50 Heat stab | Automotive heavy structure |
| PA66 | GF 50% | AVS damping additive + heat stab | GF50 AVS | EV motor, maximum stiffness + damping |
| PA66 | GF 50% | HF FR red phosphorus + heat stab | GF50 FR V0 | Most complex FR grade |
| PA66 | GF + mineral combined | Heat stab, improved flow | GF+Min | Superior surface finish, black |
| PA66 | Mineral 20% | Impact modifier | Mineral | Dimensional stability + toughness |
| PA66 | — | PTFE 4% + silicone additive + heat stab | Lubricated | Sliding bearings, wear resistance |
| PA66 | GF 30% | PTFE 4% lubricant | GF30 PTFE | Bearings, sliding bearings, wear resistance |
| PA66 | GF 30% | MoS₂ 10% lubricant | GF30 MoS₂ | Gears, sliding bearings, combined wear resistance |
| PA66 | CF 30% | Conductive, ESD 1E3 Ω·cm | CF30 Conductive | ESD protection, electronics packaging |
| PA66 | CF 30% | PTFE 10% lubricated + conductive | CF30 PTFE | Lowest friction + conductivity |
| PA66 | CF 30% | PTFE + silicone + heat stab + conductive | CF30 Premium | Premium lubricated CF grade |
| PA66 | CF 40% | Maximum conductivity 1E2 Ω·cm | CF40 Max conductive | Premium ESD applications |
| PA66 | Aramid fibre 20% | — | Aramid | High specific strength, aerospace/defence |
| PA66 recycled (PCR/PIR) | — | Standard stabiliser package | Circular | Automotive, consumer market, low CO₂ |
| PA66 recycled (PCR/PIR) | GF 30% | Standard stabiliser package | Circular GF30 | Automotive structural, 15-20% lower CO₂ |
| PA66 near-prime | GF 30% | Standard stabiliser package | Near-prime | Automotive interior/structure, cost-efficient |
| PA66 | Specialty polymer blend GF 30% | Improved chemical resistance | GF30 Chem. resist. | Chemically exposed structural parts |
| Base polymer | Reinforcement | Modifiers / Additives | Key properties | Typical applications |
|---|---|---|---|---|
| PA6 | — | Standard heat stab (AO-1098 + Irgafos) | Unfilled | Standard injection moulding |
| PA6 | — | Economic, lower MW, lower viscosity | Unfilled | Less critical applications |
| PA6 | — | Low viscosity, fast-cycle (MFI adjusted) | Unfilled | Fast-cycle injection moulding |
| PA6 | — | Medium viscosity | Unfilled | Extrusion profile, blow moulding |
| PA6 | — | High viscosity, high MW | Unfilled | Extrusion, higher tensile strength |
| PA6 | — | FDA food-contact stabiliser package | Unfilled FDA | Food-contact applications |
| PA6 | — | Super tough impact modifier, broad range | Unfilled | High impact strength, industrial |
| PA6 | GF 15% | Standard stabiliser package | GF15 | Lightweight reinforced design |
| PA6 | GF 15% | Impact modifier | GF15 | Lightweight + toughness |
| PA6 | GF 25% | Standard stabiliser package | GF25 | Generic injection moulding, cost-efficient |
| PA6 | GF 30% | Standard stabiliser package | GF30 | Cost-effective alternative to PA66 GF30 |
| PA6 | GF 30% | FDA food-contact stabiliser package | GF30 FDA | Food-contact reinforced |
| PA6 | GF 30% | Heat stab (CuI/KI) | GF30 Heat stab | Enhanced thermal stability |
| PA6 | GF 30% | Impact modifier | GF30 | Better toughness vs standard GF30 |
| PA6 | GF 50% | Standard stabiliser package | GF50 | Ultra-high stiffness, structural |
| PA6 | GF 25% + mineral 30% | Impact modifier 5% | GF+Min | Combined reinforcement + damping |
| PA6 | Glass beads 30% | Standard stabiliser package | GB30 | Dimensional stability + glossy surface |
| PA6 | — | Halogenated FR V0 (DBDPE + Sb₂O₃) | FR V0 | E&E, UL94 |
| PA6 | — | HF FR (Exolit OP950 18%), V0 | HF FR V0 | Halogen-free E&E |
| PA6 | GF 25% | Halogenated FR (DBDPE 12%), thermal break | GF25 FR V0 | E&E, thermally insulating profiles |
| PA6 | GF 30% | HF FR (red phosphorus 12%) + heat stab | GF30 HF FR V0 | E&E, no discount available |
| PA6 | — | MoS₂ 10% | MoS₂ | Low friction, wear resistant |
| PA6 | GF 30% | PTFE 4.5% | GF30 PTFE | Friction + wear resistance combined |
| PA6 | CF 20% | Antistatic, 1E3 Ω·cm | CF20 | ESD protection |
| PA6 | CF 30% | Conductive, 1E3 Ω·cm | CF30 Conductive | ESD protection |
| PA6 near-prime | — | Standard stabiliser package, natural | Near-prime | Cost-efficient, ±20% discount vs virgin |
| PA6 near-prime | — | High MFI, fast-cycle | Near-prime | Fast-cycle compounding |
| PA6 near-prime | GF 30% | Prime GF in near-prime base | Near-prime GF30 | Cost-efficient engineering |
| PA6 recycled (PCR) | — | Standard stabiliser package | Circular | Industrial/consumer market |
| PA6 recycled (PCR) | GF 30% | Standard stabiliser package | Circular GF30 | Engineering applications lower CO₂ |
| Base polymer | Reinforcement | Modifiers / Additives | Key properties | Typical applications |
|---|---|---|---|---|
| PBT | — | Standard viscosity, heat stab | Unfilled | Automotive connectors, E&E |
| PBT | — | High flowability (high MFI) | Unfilled | Thin-wall parts, fast cycle |
| PBT | — | Extrusion grade, higher viscosity | Extrusion | Profile + tube extrusion |
| PBT | — | FR, excellent electrical properties | Unfilled FR | E&E electrical insulation |
| PBT | — | HF FR (Cl/Br-free), V0 | Unfilled HF FR V0 | Medical infrastructure, E&E |
| PBT | GF 15% | PTFE 5% lubricated | GF15 PTFE | Electrical sliding bearing E&E |
| PBT | GF 20% | Impact modifier, high impact strength | GF20 | E&E automotive increased toughness |
| PBT | GF 20% | High flow FR, V0 at 0.75mm | GF20 FR V0 | E&E thin-wall design |
| PBT | GF 25% | HF FR (Cl/Br-free), V0 + 5VA | GF25 HF FR V0 | Sustainable E&E solution |
| PBT | GF 30% | Standard | GF30 | Automotive/E&E structure, best-selling |
| PBT | GF 30% | Halogenated FR (bromide), V0 | GF30 FR V0 | E&E switching, UL94 |
| PBT | GF 30% | Impact modifier 8% | GF30 | Higher toughness automotive |
| PBT | GF 33% | HF FR (Cl/Br-free), improved stiffness + V0 | GF33 HF FR V0 | E&E large-scale production |
| PBT | GF 50% | Standard + FR option | GF50 | Medical handles, E&E construction |
| PBT | — | PTFE 4% lubricated | PTFE | Wear resistance E&E sliding bearing |
| PBT/PC blend | — | Standard, chemical resistance + toughness | Blend | Automotive bumper, fender |
| PBT/PC blend | — | FR impact modifier V0 (bromide) | Blend FR V0 | Bobbins, switches, housings |
| PBT/PC blend | — | FR impact modifier + UV stabiliser | Blend FR V0 | Outdoor electrical housings |
| PBT/PC blend | — | FR impact modifier, high toughness | Blend FR V0 | Automotive exterior panels |
| PBT/PC blend | — | Impact + UV stabilised, outdoor paintable | Blend | Outdoor automotive exterior parts |
| PBT/PC blend | GF 20% | Increased stiffness | Blend GF20 | Automotive structure |
| PBT recycled (chemically upcycled PET) | — | Standard heat stab | Circular | Circular E&E, lowest CO₂ |
| PBT recycled (chemically upcycled PET) | GF 30% | Standard heat stab | Circular GF30 | Circular E&E reinforced |
| Base polymer | Reinforcement | Modifiers / Additives | Key properties | Typical applications |
|---|---|---|---|---|
| PC | — | Standard viscosity, broad processing range | Unfilled | Automotive/E&E/consumer, broad applicability |
| PC | — | Medium viscosity | Unfilled | Thin-wall injection moulding, electronics |
| PC | — | High viscosity, extrusion grade | Extrusion | Extrusion film, sheet, profile, optical quality |
| PC impact copolymer | — | Improved low-temp impact strength | Copolymer | Automotive, safety, medical |
| PC medical grade | — | Biocompatible (ISO 10993), sterilisable | Medical FDA | Medical devices, diagnostics |
| PC | GF 30% | Standard | GF30 | Structural E&E/automotive |
| PC | — | Halogenated FR film, V0 | FR V0 | E&E insulation film |
| PC | — | HF FR (Cl/Br-free), V0, RoHS/REACH | HF FR V0 | E&E housings, RoHS compliant |
| PC | CF 20% | Antistatic ESD, 1E5–1E8 Ω·cm | CF20 ESD | ESD protection, electronics transport |
| Base polymer | Reinforcement | Modifiers / Additives | Key properties | Typical applications |
|---|---|---|---|---|
| PC/ABS blend | — | Standard, high impact strength + gloss | Blend | Automotive interior, consumer electronics |
| PC/ABS blend | — | HF FR (Cl/Br-free), V0 | Blend HF FR V0 | E&E device housings |
| PC/ABS blend | — | UV stabiliser, outdoor | Blend UV-stab | Outdoor automotive/consumer application |
| Base polymer | Reinforcement | Modifiers / Additives | Key properties | Typical applications |
|---|---|---|---|---|
| PPE+PS blend | — | Standard viscosity, low shrinkage | Blend | E&E housings, switch cabinets |
| PPE+PS blend | — | Extrusion grade, non-brominated HF FR V0 | Extrusion HF FR V0 | Fibre-optic cable ducts |
| PPE+PS blend | — | Extrusion grade, low moisture absorption | Extrusion | Profile extrusion, dimensionally stable |
| PPE+PS blend | GF 20% | Dimensional stability + heat resistance | Blend GF20 | E&E structural |
| PPE+PS blend | GF 30% | Increased stiffness | Blend GF30 | Automotive underhood, E&E structure |
| PPE+PS blend | — | FR unreinforced, V0 | Blend FR V0 | Switch cabinets, device housings |
| PPE+PA blend | — | Online paintable, 25% weight saving vs GF | PPE+PA | Automotive fenders, paintable |
| PPE+PA blend | GF 20% | Impact modifier, online paintable | PPE+PA GF20 | Automotive fenders, frames |
| PPE+PA blend | GF 30% | Online paintable, minimal shrinkage | PPE+PA GF30 | Structural automotive parts |
| PPE+PA blend | — | Impact modifier, low-temp ductility | PPE+PA | Bumpers, body panels, broad elongation profile |
| PPE+PPS blend | GF | Conductive, electrostatically paintable | PPE+PPS Conductive | Electrostatically paintable structural parts |
| Base polymer | Reinforcement | Modifiers / Additives | Key properties | Typical applications |
|---|---|---|---|---|
| POM copolymer | — | Standard, MFI 10 | Unfilled | Pump components, valves, precision mechanics |
| POM copolymer | — | WRAS drinking water certification | Unfilled WRAS | Drinking water installations |
| POM copolymer | GF 30% | Standard | GF30 | Higher stiffness + improved shrinkage |
| POM copolymer | — | PTFE 3–5%, low friction | PTFE | Precision bearings, sliding bearings, wear resistant |
| POM copolymer | CF 30% | Conductive ESD, 1E3 Ω·cm | CF30 ESD | ESD protection precision parts |
| Base polymer | Reinforcement | Modifiers / Additives | Key properties | Typical applications |
|---|---|---|---|---|
| PA610 (partially bio-based) | — | Medium-high viscosity, standard stabiliser package | Bio-based | Monofilament, film, hoses, low moisture absorption |
| PA610 | GF 30% | Standard stabiliser package | GF30 Bio-based | Fuel tank, cooling circuit, superior hydrolysis resistance |
| PA610 | GF 30% | Impact modifier | GF30 Bio-based | Automotive brake line coatings |
| PA610 | — | UV/HALS stabiliser package, outdoor | Bio-based UV-stab | Outdoor cable ties, solar energy systems |
| PA612 | — | Low viscosity, excellent flow | Low-viscosity | Monofilament, thin-wall |
| PA612 | — | Low-medium viscosity | Unfilled | Monofilament bristles, filters |
| PA612 | — | Medium-high viscosity | Unfilled | Injection moulding, battery seals |
| PA612 | — | High viscosity | High-viscosity | Thick-wall profile, automotive tubing |
| PA612 | — | UV/HALS, outdoor, low viscosity | UV-stab | Outdoor cable ties, long-term UV resistance |
| PA612 | — | Nucleated + lubricated | Nucleated | Fast cycle time, industrial monofilament |
| PA612 | GF 33% | Heat stab | GF33 | Automotive structure, higher stiffness |
| PA612 | — | FDA certified, food/medical contact | FDA | Monofilament food/medical contact |
Alle samenstellingen vermeld zonder merk- of gradenamen. Neem contact op met Aevum Polymers voor specifieke materiaalidentificatie en beschikbaarheid.
Laten we samenwerken
Op zoek naar technische kunststoffen, high-performance materialen, circulaire stromen of revalorisatie van reststromen? Wij reageren binnen 24 uur.
Adres
Den Berg 20, 4661 KZ Halsteren
Nederland
Telefoon